1. The mast aerial work platform adopts the form of two groups of masts lifting at the same time, and the rising and descending stability is stronger. The mast material is made of high-strength aviation aluminum material to ensure the safety of operators.

2. The self-developed integral built-in sliding block is adopted between masts, which makes the dynamic clearance between masts smaller, and the operation is more stable and reliable when lifting, which is far better than the ordinary independent guide wheel supporting structure.

3. The site adopts four-wheel rolling chassis, which can walk easily even in corners and narrow and multi obstacle areas.

4. The guardrail is installed by lifting, and there is a sliding strip in the middle of the guardrail, which is convenient for people to get up and down.

5. The chassis is equipped with a level gauge to ensure that the machine is in a horizontal position. Suction cup leveling outrigger with level indicator always provides a solid and stable ground support for the platform, even on slightly uneven ground.

6. Using Curtis dual control switch, the platform can be operated independently.

7. The platform is equipped with emergency stop switch to prevent equipment failure and ensure the safety of personnel.

8. There is an emergency descent device under the platform. Even if the platform loses power unexpectedly, it can also ensure the platform to descend slowly, relieve the worries of operators, and make use of it more secure.

9. 100% pilot valve controls the clearance, which further improves the matching degree between masts, makes the left and right shaking of high-altitude platform small, and the technology meets the EU CE standard.

10. The platform adopts high-pressure steel wire tubing, which has reached the international standard of iso8434-1, and its compression resistance is far greater than that of the hydraulic system, which ensures the safety of the oil pipe. At the same time, the hydraulic system is equipped with anti pipeline rupture valve and hydraulic return valve, which can avoid the rapid drop of the platform even if the pipeline is accidentally broken.

11. The unique internal flow control valve design ensures the stable decline of goods and avoids the rapid drop of products from high places, thus ensuring the safety of personnel and reducing the loss caused by cargo damage.

12. Proportional control, using proportional electro-hydraulic controllable system, the platform can be adjusted to rise and fall at will.

13. 115% of the load-bearing design requires overload limit, and the chain is galvanized, which makes it more durable and safer.

14. The equipment is equipped with leakage protection switch, emergency stop switch, electrical limit switch, etc., and the button box is waterproof.

15. The double stroke switch limit of platform and cylinder piston provides double protection for raising limit, and the platform is very stable when reaching higher point.

16. The control voltage of the equipment is 24 V DC to ensure personal safety.

17. The lifting drive chain is of double chain structure and industrial plate chain with high bearing capacity and safety factor.

18. The guardrail structure is of integral collectable type, which is simple and convenient to operate. The guide wheel guide rail mechanism is set between the guardrail and the working platform, so that the opening and collecting movement can run stably and reliably without jamming.

19. The hydraulic power unit adopts integral pump station with compact structure and reliable performance; the hydraulic system is equipped with emergency descent function to prevent power failure and accidents, and the emergency operation is simple.

20. The compressive capacity of high-pressure steel wire tubing is far greater than that of hydraulic system, which ensures the safety of tubing.