Specific configuration of aerial work vehicle: Hydraulic 360 ° full rotation, three folding arms, single hydraulic lifting cylinder, with bidirectional balance valve. Electrically operated boom. With 1 ton retractable hook, four hydraulic cylinders, adjustable legs, with two-way hydraulic lock (outrigger operation is manual operation, can be controlled separately.) With 1 ton retractable hook and warning lights on the left and right. "Stop at any time" sign on the tail. Paint: Engineering yellow, with reflective strip.
Structural advantages:
1. The subframe subframe is the foundation part of aerial work vehicle, which is fixed on the vehicle girder. There is a horizontal telescopic stabilizer at the rear of the auxiliary underframe, a vertical telescopic outrigger at the front, rear, left and right respectively, the middle turning head is installed in the middle, and the outrigger control valve is installed in the slewing bearing and left front part. When working at high altitude, the auxiliary underframe plays the role of balancing, stabilizing and connecting the upper and lower vehicles.
2. Working arm working arm is composed of upper folding arm, main arm and balance mechanism. When working, the angle between main boom and horizontal large angle is 70 ° and that between upper folding arm and main boom is 140 °. The balance mechanism plays a balance role in driving the arm and the working platform.
3. The middle rotary joint is a kind of hydraulic component, that is, the pressure oil discharged from the oil pump is delivered from the fixed part of the vehicle to the moving part of the upper carriage. The rotary core of the joint is fixed on the underframe, and the outer cylinder of the joint body is connected with the rotary table. There are three pipes in the middle of the rotary joint, three oil inlets and three oil outlets. The oil passages are separated by sealing rings.
4. Outrigger bi-directional hydraulic lock outrigger lock is the protection device of outrigger oil cylinder. Its function is to ensure that the outrigger will not contract automatically after it is lowered; to prevent "soft leg" caused by leakage fault of hydraulic or pneumatic pipeline during outrigger operation, which will cause serious accident.
Source: Jiangmen aerial vehicle rental http://www.ic-hk.net
04-23
Common faults and repair methods of hoisting equipment rental in Guangdong
Guangdong lifting equipment in the operation, it is inevitable to encounter crane failure and affect the use of the situation, then the fault maintenance has become a necessary means of disposal. There are three kinds of common faults of Guangdong hoisting equipment rental crane, and the correspondi
04-23
What are the advantages of aerial vehicle in aerial vehicle operation
Specific configuration of aerial work vehicle: Hydraulic 360 ° full rotation, three folding arms, single hydraulic lifting cylinder, with bidirectional balance valve. Electrically operated boom. With 1 ton retractable hook, four hydraulic cylinders, adjustable legs, with two-way hydraulic lock (out
04-13
Analysis of the reason why the electric hoist of Guangdong hoisting equipment can not operate
Guangdong lifting equipment electric hoist can not run the reason analysis 1, can first check the equipment power fuse is burned, if one phase, so its electric hoist can not rotate, the starting torque of the crane electric hoist is zero, so the motor of the equipment will not run, it is necessary to replace enough fuse. 2. What's more, the voltage of the power grid is too low, so the dynamic torque of the equipment is proportional to the square of the voltage. The acceleration torque can not ov
04-13
Jiangmen high altitude equipment rental tells you the harm of overload operation
The excessive stress caused by overload operation of Jiangmen high-altitude equipment can break the wire rope, damage the transmission parts and burn the motor. Due to the insufficient braking force, the brake can not hold the brake, which will cause serious accidents. Overload operation has great damage to the crane structure, such as the main beam deflection, cracks and desoldering on the upper cover plate and web plate, which brings serious accident risks to the high-altitude equipment operat